HIGH CLEARANCE LONG ARM UPGRADE FOR DIESEL JLU ( 4 DOOR ONLY )
EVO MFG DIESEL JLU High Clearance Long Arm Upgrade
The EVO MFG Diesel JLU High Clearance Long Arm upgrade kit through specifically
designed bracketry allows for ultimate in suspension and chassis
clearance, larger wheel travel ability, optimal suspension geometry with
increased ride quality.
Clearance, ride quality, performance and ease of installation was our
focus in creating this long arm suspension system. The front arms mount
tucked up inside nearly flush with the bottom of the frame mounting
inches above the stock front lower mounting bracket. The rear mounting
locations for the long arm are on the side of the frame, above the
bottom giving inches of clearance over the factory locations as well.
Keeping optimal geometry while maintaining as much clearance was
critical in the design of this system. In doing so, not only did we
raise the rear control above the frame but we raised its mounting at the
rear axle by multiple inches as well. This allows for an incredible
ground clearance increase but just as importantly retaining flat and
optimal control arm angles giving ideal ground clearance, smooth ride
quality and long travel ability.
The mounting brackets are specifically designed to require no exhaust
cutting on 3.6L Jeep Wrangler JLU’s (minor grind/clearance to flange
required) and have full length hard-face mounting surfaces that weld to
your frame giving redundant and ample welding area and strength to their
mounting. The mounting brackets align to the frame simply using
existing factory holes giving complete assurance of proper locating
during install. Simply bolt brackets up to frame with existing hardware
and weld them in place.
EVO MFG Long Arm joints feature Johnny Joints on both ends of the
control arms for restriction free articulation and motion with no
wearable and limited bond rubber. All EVO MFG lower long arms are built with strength in mind.
These arms are made from industry leading 2.0” x .281” wall Steel DOM Tubing.
The EVO MFG JLU High Clearance Long Arm Upgrade is generally used to
convert your current short/mid arm suspension to long arm by reusing
some of your current suspension lift parts like coil springs, swaybar
links, bumpstop extension etc saving you the cost of repurchasing these
parts. This upgrade kit can also be used in combination with EVO Front
and Rear coil over kits to maximize your vehicles on and off-road
performance. Cutting and grinding of frame brackets required. Welding
NOTE: compatible on 4dr. JL Unlimited only
INSTALLATION TIME 14-20 HOURS
SHIPMENT & DELIVERY:
We ship domestically, sorry no international shipments. The majority of orders containing items listed as “In Stock” will ship the 1 to 2 business day. Orders requiring additional verification (security concerns, incorrect information, etc.) may need additional processing time. Items listed as “On Order” or “Out of Stock” typically ship by the estimated ship date listed on the product page. These estimated dates are not guaranteed and are subject to change periodically. Our customer service representatives monitor backorders on a daily basis to ensure your order ships as soon as possible.The delivery time of your package primarily depends on the shipping carrier and the service level selected. We ship USPS and/or FedEx ground with no signature required for delivered packages. Please keep in mind most carriers do not work on weekends or major holidays so if your wanting it for a specific trip or timeline be sure to consider that when ordering. When carriers quote shipping days, they are referring to business days. Business days are defined as Monday through Friday, with the exception of holidays observed by the selected parcel carrier. To avoid delays, ensure your address is correct and current. For specific delivery estimates, you can usually find detailed information on the carrier’s website or you can contact us for specific details.
OUT OF STOCK:
If an order is placed for a product that is labeled “On Order” or “Out of Stock”, we will keep your order in our system and ship the item as soon as it becomes available. Off Road Evolution reserves the right to split your order into multiple shipments without notification in an attempt to try and get your products to you sooner. If you wish to split your order voluntarily due to an out of stock item, please notify our customer service department and be aware that additional shipping charges may apply.
DAMAGE or LOST SHIPMENT:If your shipment becomes damaged or lost in transit, please notify us immediately. Do not discard any boxes or packaging materials that were included with the shipment. In order to fully process a damage claim, all original products and packaging materials must be provided. Off Road Evolution is not liable for damage claims that are denied due to customer negligence.
CONDITIONS OF USE:
By visiting or purchasing from Offroadevolution.com, you agree to abide by our terms and conditions, including those set forth on this page. Any revisions to our Shipping Policies will be posted on this page and any other page we deem necessary to inform our users of any changes made. We reserve the right to modify our Shipping Policies at any time. Your continued use of the Site following any policy revisions constitutes your acceptance of and agreement with the changes made.
STANDARD RETURN POLICY:
Unless another return policy is indicated, products sold by Off Road Evolution are covered by this Standard Return Policy and may be returned within 30 days of the original invoice date. Customer must notify Off Road Evolution prior to returning. A refund will only be made if your request is obtained within seven (7) days of receiving the item(s). Items being returned after the seven (7) day period will only be eligible for in-store credit. Due to the dangerous and stressful nature of racing, off-road, and performance vehicles, no returns will be accepted on opened, installed, or otherwise used products. Failure to comply with the terms stated herein, may result in delayed return processing and/or refusal of returned packages. Items that were shipped incorrectly, have been damaged in transit, or which require warranty repair or replacement are not covered by our Standard Return Policy and must be reviewed by our customer service department.
*ALL RETURNS MUST BE RETURNED TO OFF ROAD EVOLUTION AND ARE SUBJECT TO A RESTOCKING FEE OF UP TO 25%.
Refused or undeliverable orders that are returned to our facility will be processed like a standard return; this means all shipping costs, and any return-to-sender fees assessed by the shipping carrier, will be deducted from the product refund. Off Road Evolution reserves the right to deduct these additional costs, from the product refund. If you would like to return an item it is recommended that all shipments be accepted and then sent back following our standard return process. Refusing a package has the potential to have it refused, cause delays in return shipping as well as incur additional shipping charges.
Off Road Evolution often sells items that are not eligible for return. These items include tires and wheels that have been mounted, any electrical items including lights, custom items and special order items. These item sales are considered final and no returns or refunds will be granted. The buyer assumes responsibility for any and all risks that may be associated with purchasing said items. Should any items prove defective in either quality or performance after the sale is complete, the buyer assumes responsibility for the cost of all necessary servicing or repairs and agrees to absolve both Off Road Evolution and the manufacturer from any and all responsibility, unless otherwise required by law.
Off Road Evolution also sells unique or custom order items that are often times made to order and/or are considered special order items. These items are ordered in on a case by case basis. Consequently custom or special order items are not eligible for returns or exchanges. The buyer assumes responsibility that the items ordered will fit their needs.
Off Road Evolution does not offer any type of warranty coverage for defective products. However, the majority of the products available through our website are covered separately under a manufacturer’s warranty. If you recently purchased a product from Off Road Evolution and are concerned about the fitment or performance of your item, please contact us for assistance. If we suspect your product does have serious defects, we recommend you contacting the manufacturer directly for information regarding product eligibility and specific terms and conditions of warranty coverage.
Off Road Evolution does not cover miscellaneous expenses including, but not limited to labor costs for removal and installation of a defective part, materials, lost time or wages, towing, lift, dock or storage fees. Off Road Evolution shall not be liable for any incidental or consequential damages as a result of product defects.
CONDITIONS OF USE:
By visiting or purchasing from Offroadevolution.com, you agree to abide by our terms and conditions, including those set forth on this page. Any revisions to our Return Policies will be posted on this page and any other page we deem necessary to inform our users of any changes made. We reserve the right to modify our Return Policies at any time. Your continued use of the Site following any policy revisions constitutes your acceptance of and agreement with the changes made.